ElDorado National

For More Information please call Soderholm Sales at (808) 834-1417

E-Z Ridder II

E-Z Ridder II

Different transportation applications require different solutions.  The E-Z Rider II, with the flexibility of available front and/or center doors and ADA-compliant wheelchair ramps, offers passenger boarding flexibility available on no other low-floor bus.  Does the route require clean fuel technology?  The answer is E-Z.  The E-Z Rider II is available with transit-tested diesel, liquefied (LNG) and compressed (CNG) natural gas fuel systems as well as the latest hybrid electric propulsion systems.  Is passenger capacity important?  The E-Z Rider II can accommodate up to 41 seated passengers on a 35 foot bus.  No other low-floor bus even comes close!

Tired of trying to run a lightweight bus in a heavyweight duty-cycle?  With heavy-duty Arvin Meritor axles, large S-cam air brakes, and a transit-proven and crash-tested, monocoque safety cage, the E-Z Rider II is designed and built to take real-world punishment year after year.  Designed and manufactured in the United States, the E-Z Rider II is the low-floor solution. 

Standard Features


BODY:
  • Altoona tested for a 12 year / 500,000 mile life cycle
  • Side impact crash tested
  • Roof crush tested
  • Integrally welded, monocoque body construction
  • Welded steel gussets at all window posts
  • Fully welded, 11 gauge, electro-galvanized steel wheelwells
  • Grit blasted cage preparation
  • Entire body structure is coated with PPG CRE904 primer/sealer
  • An additional coating of PPG Corashield is applied to the exterior of all exposed structural steel surfaces
  • The interior of all tubular structures are coated with Ziebart
  • Type A rust proofing
  • Solid steel rear engine firewall
  • .080 inch aluminum exterior sidewalls
  • .063 inch aluminum exterior roof panel
  • Removable lower sidewall panels
  • Undercoated and edge sealed .75 inch thick, ACQ Marine grade plywood flooring
  • 2.5 inch thick insulation with R-7 rating
  • Platinum gray melamine interior walls and ceiling finish
  • RCA rubber flooring with ribbed aisle
  • Passenger windows are top T-slide type with 1/4 inch laminated safety glass
  • Front slide/glide entry/exit door 37.25 inch x 78.5 inch panel opening, Vapor brand
  • I/O Controls brand multiplex electrical system
  • Interior mounted electrical cabinet with integral storage compartments
  • Number coded electrical wiring with protective loom
  • Manual resetting circuit breakers
  • As-built electrical junction compartment schematic
  • All ICC required exterior lighting
  • Drivers windshield roller shade
  • Fluorescent interior lighting with ad rails
  • Stepwell lighting
  • Rear engine compartment controls and gauges
  • 7 inch x 14 inch exterior mirrors with integrated convex lenses
  • Passenger assists fabricated of stainless steel
  • Dash mounted heater/defroster system
  • Roof mounted emergency escape hatch and vent
  • One color, full body paint finish
  • Two-stage undercoating process
  • Rear mud flaps
  • Front tow hooks
  • Transit grade HELP bumpers, front and rear
CHASSIS:
  • Solid I-beam front axle Arvin Meritor brand
  • Conventional rear axle Arvin Meritor brand
  • Air ride suspension front and rear axles
  • Cummins 2013 ISB diesel engine
  • Cummins engine protection system
  • Allison B300R transmission
  • S-cam air brake system with integral ABS front and rear axles
  • 22.5 inch painted steel wheels
  • 275/70R 22.5 steel belted radial tires
  • 80 gallon fuel tank
  • 8-D battery
  • 200 amp rated air-cooled alternator
  • High idle system
  • Non-sandwiched designed radiator/charge air cooler layout
  • Stainless steel radiator tanks
  • Vertical exhaust pipe
  • Gear driven air compressor
  • Power assist steering
  • High capacity, disposable air cleaner with filter service indicator
  • Engine hour meter
  • Power steering